Amana Through-the-Wall AC and Heat Pump Recall: What to Check in 2026
A September 2026 CPSC recall covers certain Amana through-the-wall air conditioners and heat pumps because a control-board component can create a fire hazard.
Illustrative image. Use the official notice linked below to identify the specific affected product or listing.
If you have an Amana through-the-wall room air conditioner or heat pump, it is worth checking the model label before the unit is used again. The U.S. Consumer Product Safety Commission announced a recall on September 3, 2026 involving about 4,633 units. The issue is not a routine maintenance problem: CPSC says a snubber circuit can emit flames if it shorts.
Quick Takeaway: Stop using an affected unit and confirm the model number on the official recall page. This recall is separate from normal HVAC troubleshooting and should not be handled as a DIY electrical repair.
Which Amana Units Are Included?
The September recall covers specific through-the-wall models, including PBC092J00AA, PBC093J00AA, PBC122J00AA, PBC123J00AA and PBH092J12AA. The model and serial number are on a white label along the front edge of the base pan. Do not assume every Amana room unit is recalled—match the model exactly.
Why the Recall Was Issued
According to CPSC, the snubber circuit can short and emit flames. Two reports involved a control-board component shorting, and no injuries had been reported when the notice was published.
What Owners Should Do
CPSC says consumers should stop using recalled units and contact Daikin Comfort Technologies Manufacturing for a full refund. The official process requires product identification, so take a clear photo of the model and serial label before moving or disconnecting anything.
Do Not Treat This Like a Standard AC Repair
A recalled electrical component is different from a dirty filter, blocked airflow or a normal service issue. Do not open the control compartment or attempt to bypass the failed part yourself. If the unit belongs to a landlord, hotel or property manager, report the model information to the responsible owner or maintenance team.
Why This Update Matters for Fall Heating
Some affected units are heat pumps, so they may be used for both cooling and heating. A unit that seemed fine during summer can still be part of the recall before heating season begins. Checking the label now is more useful than waiting for a symptom.
Our Practical Take
Product recalls are model-specific. The fastest safe check is the label, not the appearance of the unit. If the model matches the CPSC list, follow the recall remedy even if the equipment has never shown a problem.
Related Reading
See our 2026 HVAC refrigerant guide, heat-pump clearance guide, and more HVAC articles.
Official Source
Get Free Daily Tips & Useful Updates
Practical home guides, savings ideas and useful consumer updates from Best of Artisans.